Kia Sportage: Ambient Sensor: Description and Operation| Description |
| 1. |
The ambient temperature sensor is located at the front of the
condenser and detects ambient air temperature. It is a negative type
thermistor; resistance will increase with lower temperature, and
decrease with higher temperatures. |
| 2. |
The sensor output will be used for discharge temperature
control, temperature regulation door control, blower motor level
control, mix mode control and in-car humidity control.
|
If the Engine Overheats
TIP
If the temperature gauge indicates that the engine is overheating, you may notice reduced power or a loud pinging or
knocking noise. These symptoms can indicate that the engine is too hot.
Coo ...
If the engine will not start
If engine doesn't turn over or turns over slowly
1.If your car has an automatic transaxle, be sure the shift lever is in N (Neutral)
or P (Park) and the emergency brake is set.
2.Check the bat ...
Knock Sensor (KS): Description and Operation
Description
Knocking is a phenomenon characterized by undesirable
vibration and noise and can cause engine damage. Knock Sensor (KS) is
installed on the cylinder block and senses engine knockin ...