Kia Sportage: Brake Line: Components and Components Location
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Brake System / Brake System / Brake Line: Components and Components Location
| Components |
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the battery terminal and then remove the battery.
3.
Disconnect the ECM connector and the E...
Master Cylinder: Repair procedures
Removal
1.
Disconnect the brake fiuid level switch connector, and remove the reservoir cap.
2.
Remove the brake fluid from the master cylinder reservoir with a syringe.
&nb...
Brake Line: Repair procedures
See also:
Power Mosfet: Repair procedures
Inspection
1.
Ignition "ON"
2.
Manually operate the control switch and measure the voltage of blower motor.
3.
Select the control switch to raise voltage until high speed.
Specification
...
Electric Waste Gate Actuator (EWGA): Specifications
Specification
[EWGA Position Sensor]
PositionOutput Voltage[V]Operating Angle[°]Range of Rod [mm], referenceMechanical Close end stop Position (MCP)4.800Electrical Close end stop Position ...
Turn signal indicator
The blinking green arrows on the instrument panel show the direction indicated
by the turn signals. If the arrow comes on but does not blink, blinks more rapidly
than normal, or does not illumin ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0621