Kia Sportage: Catalytic Converter: Description and Operation - Exhaust Emission Control System - Emission Control SystemKia Sportage: Catalytic Converter: Description and Operation

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Emission Control System / Exhaust Emission Control System / Catalytic Converter: Description and Operation

Description
The catalytic converter of the gasoline engine is a three way catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and separates oxygen from the oxides of nitrogen (NOx).
There are two types of three-way catalyst; Palette type and Monolith type.

Description and Operation
Description Exhaust emissions (CO, HC, NOx) are controlled by a combination of engine modifications and the addition of special control components. Modifications to the combustion chamber, int...
CVVT (Continuously Variable Valve Timing) System: Description and Operation
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by ...
See also:

Front Wheel Speed Sensor: Components and Components Location
Components 1. Front wheel speed sensor connector2. Front wheel speed sensor ...

Electric Waste Gate Actuator (EWGA): Repair procedures
Inspection [Motor] 1. Turn ignition switch OFF. 2. Disconnect the EWGA connector. 3. Check that the EWGA is stuck by foreign material. 4. Measure resistance between motor (+) and ( ...

Checking the engine oil level
1.Be sure the vehicle is on level ground. 2.Start the engine and allow it to reach normal operating temperature. 3.Turn the engine off and wait for a few minutes (about 5 minutes) for the oil to r ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0525