Kia Optima Manuals

Kia Sportage: Crankshaft Position Sensor (CKPS): Description and Operation - Engine Control System - Engine Control / Fuel SystemKia Sportage: Crankshaft Position Sensor (CKPS): Description and Operation

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Control / Fuel System / Engine Control System / Crankshaft Position Sensor (CKPS): Description and Operation

Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop because of CKPS signal missing. This sensor is installed on the cylinder block or the transaxle housing and generates alternating current by magnetic flux field which is made by the sensor and the target wheel when engine runs.
The target wheel consists of 58 slots and 2 missing slots on 360 degrees CA (Crank Angle).

Engine Coolant Temperature Sensor (ECTS): Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Remove the ECTS (Refer to "Removal"). 3. After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECT...
Crankshaft Position Sensor (CKPS): Troubleshooting
Wave Form...
See also:

Theft-alarm stage
The alarm will be activated if any of the following occurs while the system is armed. A front or rear door is opened without using the ignition key or transmitter (or smart key). The tailga ...

Selective Catalytic Reduction
The Selective Catalytic Reduction (SCR) system uses urea solution as a reducing agent to convert nitrogen oxides into nitrogen and water. Warning Using a vehicle that does not consume t ...

To increase cruise control set speed
Follow either of these procedures: Push the RES + switch and hold it. Your vehicle will accelerate. Release the switch at the speed you want. Push the RES + switch and release it immediatel ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0602