Kia Sportage: Description and Operation

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Electrical System / Charging System / Description and Operation

Description

The charging system includes a battery, an alternator with a built-in regulator, and the charging indicator light and wire.

The Alternator has built-in diodes, each rectifying AC current to DC current.

Therefore, DC current appears at alternator "B" terminal.

In addition, the charging voltage of this alternator is regulated by the ECM.

The main components of the alternator are the rotor, stator, rectifier, capacitor brushes, bearings and V-ribbed belt pulley. The brush holder contains a built-in electronic voltage regulator.

1. Brush

2. Dirve belt pulley

3. Rotor

4. Stator

5. Rectifier

Alternator Management System (AMS)

Alternator management system controls the charging voltage set point in order to improve fuel economy, manage alternator load under various operating conditions, keep the battery charged, and protect the battery from over-charging. ECM controls generating voltage by duty cycle (charging control, discharging control, normal control) based on the battery conditions and vehicle operating conditions.

The system conducts discharging control when accelerating a vehicle. Vehicle reduces an alternator load and consumes an electric power form a battery.

The system conducts charging control when decelerating a vehicle. Vehicle increases an alternator load and charges a battery.

Charging System

...

Repair procedures

On-vehicle Inspection • Check that the battery cables are connected to the correct terminals. • Disconnect the battery cables when the battery is g...

Kia Sportage: Description and Operation

See also:

Categories