Kia Sportage: ESC OFF Switch: Repair procedures - ESC(Electronic Stability Control) System - Brake SystemKia Sportage: ESC OFF Switch: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Brake System / ESC(Electronic Stability Control) System / ESC OFF Switch: Repair procedures

Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad side switch assembly.

3.
Check the continuity between the switch terminals as the ESC OFF switch is engaged.

ESC OFF Switch: Description and Operation
Description 1. The ESC OFF switch is for the user to turn off the ESC system. 2. The ESC OFF lamp is on when ESC OFF switch is engaged....
DBC Switch: Description and Operation
Description The DBC function is the acronym word of Downhill Brake Control function. When a vehicle goes down the hill, just pushing the DBC switch enables the car to keep its vehicle''s speed ...
See also:

CVVT (Continuously Variable Valve Timing) System: Description and Operation
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by ...

Recommended SAE viscosity number
Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicl ...

Ventilation
1.Set the mode to the position. 2.Set the air intake control to the outside (fresh) air position. 3.Set the temperature control to the desired position. 4.Set the fan speed control to the desired ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0572