Kia Sportage: Evaporator Temperature Sensor: Repair procedures| Inspection |
| 1. |
Ignition "OFF". |
| 2. |
Disconnect evaporator temperature sensor. |
| 3. |
Using the multi-tester, Measure resistance between terminal "1" and "2" of evaporator temperature sensor.
Specification
|
| Replacement |
| 1. |
Remove the console extension cover (A).
|
| 2. |
Remove the evaporator temperature sensor (A), by pulling it after rotating 90° in a clockwise direction.
|
| 3. |
Installation is the reverse order of removal. |
Integrated Memory System: (if equipped)
Setting memory position
Operation
Adjust the following Kia Sportage settings to your preferred positions:
D ...
Coolant: Repair procedures
Refilling And Bleeding
Never remove the radiator cap when the engine is hot. Serious
scalding could be caused by hot fluid under high pressure escaping from
the rad ...
Infant or small child
You should be aware of the specific requirements in your country. Child and/or
infant seats must be properly placed and installed in the rear seat. For more information
about the use of these rest ...