Kia Optima Manuals

Kia Sportage: Front Impact Sensor (FIS): Description and Operation - SRSCM - RestraintKia Sportage: Front Impact Sensor (FIS): Description and Operation

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Restraint / SRSCM / Front Impact Sensor (FIS): Description and Operation

Description
The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.
SRS Control Module (SRSCM): Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Disconnect the DAB, PAB, SAB, CA...
Front Impact Sensor (FIS): Components and Components Location
Components...
See also:

Parking Collision-Avoidance Assist Malfunction
A: Check Driver Assistance system. If Parking Collision-Avoidance Assist or one of its related components develops a problem, a warning message ...

Owner maintenance schedule
When you stop for fuel: Check the engine oil level. Check the coolant level in the coolant reservoir. Check the windshield washer fluid level. Look for low or under-inflated tires. WA ...

Vehicle Stability Management (VSM). Emergency Stop Signal (ESS)
Vehicle Stability Management (VSM) Vehicle Stability Management (VSM) further supports vehicle stability and steering response, helping the driver maintain control in appropriate driving conditions ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0617