Kia Sportage: Fuel Tank Pressure Sensor (FTPS): Description and Operation
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Control / Fuel System / Engine Control System / Fuel Tank Pressure Sensor (FTPS): Description and Operation
| Description |
Fuel Tank Pressure Sensor (FTPS) is a component of the
evaporative emission control system. It is installed on the fuel tank
near the fuel pump assembly. It checks the evaporative system and
detects an evaporative leak in the system.
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
Specification: Refer t...
Accelerator Position Sensor (APS): Repair procedures
Specification
Pressure[kPa (kgf/cm?, in H2O)Output Voltage (V)-6.67 (-0.068, -26.8)0.502.5+6.67 (0.068, 26.8)4.5...
Fuel Tank Pressure Sensor (FTPS): Specifications
See also:
Replacing room lamp (Bulb type). Replacing vanity mirror lamp (Bulb type)
Replacing room lamp (Bulb type)
Procedure
Use a flat-blade screwdriver to gently prise the lens cover away from the lamp housing.
Pull the bul ...
Floor mat anchors
Secure each floor mat to its designated anchor to prevent it from sliding forward while driving.
WARNING
Aftermarket floor mats
...
Tie-down hook (for flatbed towing)
WARNING - Front tiedown hooks
Do not use the tie-down hooks under the front of the vehicle for towing purposes.
These hooks are designed ONLY for transport tie-down. If the tie-down hooks are ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0746