Kia Sportage: Fuel Tank Pressure Sensor (FTPS): Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Control / Fuel System / Engine Control System / Fuel Tank Pressure Sensor (FTPS): Repair procedures

Inspection

1.	Connect the GDS on the Data Link Connector (DLC).

Measure the output voltage of the FTPS.

Specification: Refer to "Specification"

Removal

1.	Turn the ignition switch OFF and disconnect the battery negative (-) cable.

2.	Remove the rear seat (Refer to "Seat" in BD group).

3.	Remove the fuel pump service cover (A).

4.	Disconnect the fuel tank pressure sensor connector (A).

5.	Remove the fuel tank pressure sensor after releasing the hooks vertically.

Installation

•	Install the component with the specified torques.

•	Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.

•	Insert the sensor in the installation hole and be careful not to damage.

1.	Installation is reverse of removal.

Fuel Tank Pressure Sensor (FTPS): Schematic Diagrams

Circuit Diagram...

Injector: Description and Operation

Description Based on information from various sensors, the ECM can calculate the fuel amount to be injected. The fuel injector is a solenoid-operated valve and the fuel injection amount is cont...

Kia Sportage: Fuel Tank Pressure Sensor (FTPS): Repair procedures

See also:

Categories