Kia Sportage: Heated Oxygen Sensor (HO2S): Specifications
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Control / Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S): Specifications
| Specification |
HO2S [Bank 1/Sensor 1]
| Item | Specification |
| Heater Resistance (?) | 2.5 ~ 4.0 [20°C(68°F)] |
HO2S [Bank 1/Sensor 2]
| A/F Ratio (?) | Output Voltage(V) |
| RICH | Approx. 0.9 |
| LEAN | Approx. 0.04 |
| Item | Specification |
| Heater Resistance (?) | 3.3 ~ 4.1?[21°C(69.8°F)] |
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina
and is installed both upstream and downstream of the Manifold Catalytic
Converter. The sensor output voltage varies in ...
Heated Oxygen Sensor (HO2S): Description and Operation
Circuit Diagram...
Heated Oxygen Sensor (HO2S): Schematic Diagrams
See also:
Forward and backward
Push the control switch forward or backward to move the seat to the desired position.
Release the switch once the seat reaches the desired position. ...
Bluetooth® Wireless Technology
Bluetooth® Wireless Technology
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, lnc. and any use of such marks by Kia is under license.
A Bluetooth® enabled ...
Overhead Console Lamp: Repair procedures
Inspection
Remove the overhead console lamp assembly then check for
continuity between terminals. If the continuity is not as specified,
replace the map lamp switch.
No.DescriptionNo.Descrip ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0692