Kia Optima Manuals

Kia Sportage: Intake Air Temperature Sensor (IATS): Repair procedures - Engine Control System - Engine Control / Fuel SystemKia Sportage: Intake Air Temperature Sensor (IATS): Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Control / Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS): Repair procedures

Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the specification.
Specification: Refer to “Specification”
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the manifold absolute pressure sensor connector (A).
3.
Remove the installation bolts (B), and then remove the sensor from the surge tank.

Installation
   
•
Install the component with the specified torques.
•
Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
   
•
Insert the sensor in the installation hole and be careful not to damage.
1.
Installation is reverse of removal.
Manifold absolute pressure sensor installation bolt:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Intake Air Temperature Sensor (IATS): Schematic Diagrams
Circuit Diagram...
Engine Coolant Temperature Sensor (ECTS): Description and Operation
Description Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant passage of the cylinder head for detecting the engine coolant temperature. The ECTS uses a thermistor that ...
See also:

Components and Components Location
Component Location 1. Driver power window main switch2. Passenger window switch3. Front window motor4. Rear window motor5. Rear window switch ...

Power brakes
Your vehicle has power-assisted brakes that adjust automatically through normal usage. In the event that the power-assisted brakes lose power because of a stalled engine or some other reason, you ...

In case of an emergency while driving
If the engine stalls at a crossroad or crossing If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. If you h ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0613