Kia Optima Manuals

Kia Sportage: Knock Sensor (KS): Repair procedures - Engine Control System - Engine Control / Fuel SystemKia Sportage: Knock Sensor (KS): Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Control / Fuel System / Engine Control System / Knock Sensor (KS): Repair procedures

Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Remove the intake manifold (Refer to “Intake And Exhaust System” in EM group).
3.
Disconnect the knock sensor connector (A).
4.
Remove the installation bolt (B), and then remove the sensor from the cylinder block.

Installation
   
•
Install the component with the specified torques.
•
Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
1.
Installation is reverse of removal.
Knock sensor installation bolt:
18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft)
Knock Sensor (KS): Schematic Diagrams
Circuit Diagram...
Heated Oxygen Sensor (HO2S): Description and Operation
Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in ...
See also:

Windows
Power window lock switch Left rear door power window switch Right rear door power window switch Driver’s door power window switch Fr ...

Immobilizer indicator
With smart key system If any of the following occurs in a vehicle equipped with the smart key, the immobilizer indicator illuminates, blinks or goes off. When the smart key is in the vehicle, ...

Description and Operation
Description The 6-speed automatic transaxle consists of an overdrive clutch (OD/C), a one-way clutch (OWC), a lower and reverse brake (LR/B), an underdrive brake (UD/B), a 26 brake (26/B), and ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.054