Kia Optima Manuals

Kia Sportage: License Lamps: Repair procedures - Lighting System - Body Electrical SystemKia Sportage: License Lamps: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Lighting System / License Lamps: Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the lens (A) and license lamp (B) after loosening 2 screws.

Installation
1.
Install the bulb.
2.
Install the license lamp lens.
Front Fog Lamps: Repair procedures
Inspection Front Fog Lamp Switch 1. With the fog lamp switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the mul...
High Mounted stop lamp: Repair procedures
Removal High Mounted Stop Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate trim. (Refer to the BD group - "Tailgate") 3. Remove the spoiler. (Refer to the...
See also:

Rear Cross-Traffic Collision-Avoidance Assist Malfunction and Limitations
Rear Cross-Traffic Collision-Avoidance Assist Malfunction A: Check Driver Assistance system. If Rear Cross-Traffic Collision-Avoidance Assist ...

Trailer towing: (if equipped)
If you plan to tow with your Kia Sportage, first contact your country’s Department of Motor Vehicles to confirm the legal requirements that apply. Towing regulations vary by location, and the re ...

Limitations of Blind-Spot Collision-Avoidance Assist
Blind-Spot Collision-Avoidance Assist (BCA) may not detect nearby traffic reliably in every situation. It may also issue a warning or provide assistance unexpectedly when visibility, sensor conditi ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0627