Kia Sportage: Master Cylinder: Components and Components Location
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Brake System / Brake System / Master Cylinder: Components and Components Location
| Components |
| 1. Reservoir cap 2. Reservoir | 3. Grommet 4. Master cylinder |
Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following tests.
1.
Run the engine for one or two minutes, and then stop it. If
the pedal depress...
Brake Booster: Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the battery terminal and then remove the battery.
3.
Disconnect the ECM connector and the E...
Master Cylinder: Repair procedures
See also:
Manual climate control system
1.Turn the ignition switch to the ON position.
2.Turn the mode selection knob to the defrost position ().
3.Press the air intake control button at least 5 times within 3 seconds.
The indicator li ...
Compression Test
Compression Pressure Inspection
If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure.
1.
Warm up and stop ...
Starting the engine
WARNING- Proper footwear
Always wear appropriate shoes when operating your vehicle. Unsuitable shoes
(high heels, ski boots, sandals, etc.) may interfere with your ability to use the
brake an ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0622