Kia Sportage: Output Speed Sensor: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor: Repair procedures

Inspection

Check signal waveform of Input & output speed sensor using the GDS.

Specification: Refer to "Signal Wave Form" section.

Removal

1.	Remove the valve body assembly. (Refer to "Valve Body" in Hydraulic System of this group)

2.	Disconnect the input & output speed sensor connector (A) from the main wiring.

Remove the input & output speed sensor (B) after removing the bolts(2ea).

Tightening torque :

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Installation

Install in the reverse order of removal.

•	Adding Automatic Transaxle Fluid (ATF). (Refer to "Fluid" in Hydraulic System of this group)

•	Use new valve body gasket (A).

Output Speed Sensor: Troubleshooting

Signal Waveform Fig 1) Input/Output speed sensor at low speed Fig 2) Input/Output speed sensor at high speed...

Torque Converter Control Solenoid Valve (T/CON_VFS): Description and Operation

Description Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque conv...

Kia Sportage: Output Speed Sensor: Repair procedures

See also:

Categories