Kia Optima Manuals

Kia Sportage: Power Window Motor: Repair procedures - Power Windows - Body Electrical SystemKia Sportage: Power Window Motor: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Power Windows / Power Window Motor: Repair procedures

Inspection
Front Power Window Motor
1.
Remove (-) negative battery terminal.
2.
Remove the front door trim.
(Refer to the BD group - "Front door")
3.
Disconnect the connector from the motor.
(A : Safety, B : Standard)

4.
Connect the motor terminals directly to battery voltage (12V) and check that the motor operates smoothly. Next, reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor.
[Standard]

5.
Connect the terminal No. 2 and No. 3 to battery voltage (12V) and check that the motor operates smoothly when connecting the terminals below.
[Safety]

Rear Power Window Motor
1.
Remove (-) negative battery terminal.
2.
Remove the rear door trim.
(Refer to the BD group - "Rear door")
3.
Disconnect the connector from the motor.

4.
Connect the motor terminals directly to battery voltage (12V) and check that the motor operates smoothly. Next, reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor.

Description and Operation
Operation Function Of Safety Power Window When all door (Front, Rear) power window auto-up switch is operated, safety function is activated. 1. Safety function condition When detect the force o...
Power Window Switch: Components and Components Location
Components Power Window Main Switch Passenger Power Window Switch Rear Power Window Switch...
See also:

Tachometer
The tachometer indicates the approximate number of engine revolutions per minute (rpm). Use the tachometer to select the correct shift points and to prevent lugging and/or over-revving the engi ...

35R Clutch Control Solenoid Valve(35R/C_VFS): Specifications
Specifications Direct control VFS[35R/C] ? Control type : Normal high type Control Pressure kpa (kgf/cm?, psi)500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)Current value(mA)50 ~ 850 Internal resi ...

Front Seat: Repair procedures
Replacement     • When removing or installing the front passenger seat, be sure to initialize the Passive Occupant Detection System (PODS) (If initialization proc ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0729