Kia Sportage: Pressure Sensor: Repair procedures
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / 4 Wheel Drive (4WD) System / Coupling Assembly / Pressure Sensor: Repair procedures
| Inspection |
If you have trouble code related to the pressure sensor
(P1825, P1826, P1827, P1828), check pressure sensor according to the
inspection process.
|
| Pressure Sensor Inspection Procedure |
| Measure the resistance of pressure sensor |
| 1. |
Turn ignition switch OFF. |
| 2. |
Disconnect the pressure sensor connector. |
| 3. |
Measure resistance between sensor terminal and terminal. |
| 4. |
Check the measured resistance. (Refer to table)
|
| Removal |
| 1. |
Remove the coupling assembly.
(Refer to "coupling assembly" in 4WD group) |
| 2. |
Remove the extension Cable (A).
|
| 3. |
Remove the pressure sensor (A) with 24mm socket.
|
| Installation |
|
| 1. |
Installation is the reverse of removal. |
Circuit Diagram...
Pressure Sensor: Schematic Diagrams
Driveshaft and axle
See also:
Floor mat anchors
Secure each floor mat to its designated anchor to prevent it from sliding forward while driving.
WARNING
Aftermarket floor mats
...
Ventilation
1.Set the mode to the position.
2.Set the air intake control to the outside (fresh) air position.
3.Set the temperature control to the desired position.
4.Set the fan speed control to the desired ...
To defog inside windshield
1.Set the fan speed to the desired position.
2.Select desired temperature.
3.Select the or
position.
4.The outside (fresh) air will be selected automatically. If the
position is selected, ai ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0556