Kia Sportage: Rear Bumper: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body (Interior and Exterior) / Bumper / Rear Bumper: Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trip pieces to without marring the surface.

•	Take care not bend or scratch the cover and other parts.

1.	After loosening the mounting screws, then remove the rear combination lamp (A).

2.	Push the lock pin, disconnect the connector (B).

3.	After loosening the rear bumper side’s mounting screws and clip, then disconnect the side’s.

4.	Loosen the mounting bolts.

5.	After loosening the mounting screws and clip, then remove the rear bumper (A).

6.	Push the lock pin, disconnect the rear bumper main connector (A).

7.

Installation is the reverse of removal.

•	Make sure the connector is plugged in properly.

•	Replace any damage clips.

Rear Bumper: Components and Components Location

Components 1. Front bumper cover2. Front bumper side bracket [RH]3. Front bumper side bracket [LH]...

Seat & Power Seat

...

See also:

Care of seat belts
Never dismantle or modify the seat belt system. Protect the belts and their components from damage caused by seat hinges, doors or improper handling. Regular care helps ensure that the restraints i ...

START/RUN
Not illuminated • With automatic transaxle To start the engine, depress the brake pedal and press the ENGINE START/ STOP button with the shift lever in the P (Park) or the N (Neutral) position ...

SS-B Solenoid Valve(ON/OFF): Description and Operation
Description SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed at valve body. ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0554