Kia Sportage: Rear combination lamp: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Lighting System / Rear combination lamp: Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Loose screws (2EA) holding the rear combination lamp then disconnect the connector (A) then remove the outside rear combination lamp (B).

3.	Turn the socket counterclockwise to remove the tail/stop lamp bulb (A).

4.	Loosen the nuts (A) after removing the tailgate lamp cover.

5.	Remove the tailgate lamp after disconnecting the connector (B).

6.	Turn the socket counterclockwise to remove the back up lamp bulb (A) and tail lamp bulb (B).

7.	If the bulbs should be only replaced without removing lamp assembly, replace the back up lamp bulb (A) and tail lamp bulb (B) after removing the tailgate lamp cover inside tailgate.

Installation

1.	Install the tailgate combination lamp assembly after assembling the bulb.

2.	Install the lamp cover to the tailgate after connecting the lamp connector.

3.	Install the rear combination lamp assembly after assembling the bulbs and connecting the lamp connector.

Luggage Room Lamp: Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage room lamp (B) when prying the hole (A) with a flat-up screwdriver. 3. Remove the luggage room lamp bulb in ca...

Troubleshooting

Troubleshooting SymptomPossible causeRemedyOne lamp does not light(all exterior)Bulb burned outReplace bulbSocket, wiring or ground faultyRepair if necessaryHead lamps do not lightBulb burned out...

Kia Sportage: Rear combination lamp: Repair procedures

See also:

Categories