Kia Optima Manuals

Kia Sportage: Rear Washer Motor: Repair procedures - Rear Wiper/Washer - Body Electrical SystemKia Sportage: Rear Washer Motor: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Rear Wiper/Washer / Rear Washer Motor: Repair procedures

Inspection
1.
With the washer motor connected to the reservoir tank, fill the reservoir tank with water.
   
Before filling the reservoir tank with water, check the filter for foreign material or contamination. if necessary, clean the filter.
2.
Remove the front bumper cover.
(Refer to the BD group - "Front bumper")
3.
Connect positive (+) and negative (-) battery cables to terminals 2 and 1 respectively to see that the washer motor runs and water is pumped.
4.
Check that the motor operates normally.
Replace the motor if it operates abnormally.

No
Description
No
Description
1
GND
2
Washer (+)

Rear Washer Switch: Repair procedures
Inspection Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and washer switch. Rear Wiper Switch Rear Was...
Electro chromic Inside Rear View Mirror
...
See also:

When Active ECO is activated
The acceleration may slightly be reduced eventhough you depress the accelerator fully. The air conditioner performance may be limited. The shift pattern of the automatic transaxle may change ...

Checking tire inflation pressure
Check your tires once a month or more. Also, check the tire pressure of the spare tire. How to check Use a good quality gauge to check tire pressure. You can not tell if your tires are properly i ...

Relay Box (Engine Compartment): Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Pull out the relay from the engine compartment relay box. Power Relay (Type A) Check for continuity between the terminals. A ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0506