Kia Sportage: Rear window defroster - Defroster - Features of your vehicleKia Sportage: Rear window defroster

Kia Sportage Owners Manual (3rd Generation, SL; 2011-2016) / Features of your vehicle / Defroster / Rear window defroster

The defroster heats the window to remove frost, fog and thin ice from the rear window, while the engine is running.

To activate the rear window defroster, press the rear window defroster button located in the center facia switch panel. The indicator on the rear window defroster button illuminates when the defroster is ON.

If there is heavy accumulation of snow on the rear window, brush it off before operating the rear defroster.

The rear window defroster automatically turns off after approximately 20 minutes or when the ignition switch is turned off. To turn off the defroster, press the rear window defroster button again.

Outside rearview mirror defroster (if equipped)

If your vehicle is equipped with the outside rearview mirror defrosters, they will operate at the same time you turn on the rear window defroster.

Wiper deicer (if equipped)

If your vehicle is equipped with the wiper deicer, it will operate at the same time you turn on the rear window defroster.

Defroster
CAUTION - Conductors To prevent damage to the conductors bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window. ...
Manual climate control system
1. Fan speed control knob 2. Front windshield defroster button 3. Air conditioning button (if equipped) 4. Air intake control button 5. Rear window defroster button 6. Temperature control knob 7...
See also:

To turn off the blowers
To turn off the blowers, turn the fan speed control knob to the "0" position. ...

Securing a Child Restraint System with the “ISOFIX Anchorage System”. Securing a Child Restraint System seat with the “ISOFIX top tether anchorage” system
Securing a Child Restraint System with the “ISOFIX Anchorage System” Operation Move the seat belt buckle clear of the ISOFIX anchorages so it will not obstruct the installation. ...

Bright-metal maintenance
To remove road tar and insects, use a tar remover, not a scraper or other sharp object. To protect the surfaces of brightmetal parts from corrosion, apply a coating of wax or chrome preserv ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0598