Kia Optima Manuals

Kia Sportage: Repair procedures - AVN System - Body Electrical SystemKia Sportage: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / AVN System / Repair procedures

Removal
   
Take care not to damage and scratch the hazard lamp switch assembly and its related parts.
Apply the protective tapes to the hazard lamp switch assembly and its related parts.
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad passenger''s garnish (A).
(Refer to BD group - "Crash pad")

3.
Disconnect the connectors and remove the cluster fascia panel (A).
(Refer to BD group - "Crash pad")

4.
Remove the center fascia panel (A) after loosening the mounting screw (2EA).

5.
Disconnect the connector (A) installed on the center fascia panel.

6.
Remove the AVN assembly (A) after loosening the mounting screw (4EA).

7.
Disconnect the AVN connectors (A) and cable, then remove the AVN unit completely.

   
Lift the connector locking clip to the arrow direction, disconnect the connector.
When assembling, install the connector and connector locking clip.
   
–
If CD does not eject, don''t try to remove it.
–
The player may be damaged.
–
Therefore, contact a service shop for repairs.
Installation
1.
Connect the AVN head unit connectors and cable.
2.
Install the AVN head unit.
3.
Install the center fascia panel.
4.
Install the cluster fascia panel.
5.
Install the crash pad passenger''s garnish.
6.
Connect the negative (-) battery terminal.
   
a.
Make sure the connector are connected in properly.
b.
Check the AVN system.
Description and Operation
Limitations Of The Navigation system GPS Signal Reception State As the GPS satellite frequency is received/transmitted in straight lines, reception may not work if hiding devices are placed on ...
AUX(Auxiliary) Jack: Description and Operation
Description The multimedia jack on the console upper cover is for customers who like to listen to external portable music players like the MP3, iPod and etc., through the vehicle''s sound syste...
See also:

Fob Holder: Repair procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the floor console. (Refer to the BD group - "Console") 3. Disconnect the connector (B), then remove the fob holder assemb ...

Defogging logic
To reduce the possibility of fogging up the inside of the windshield, the air intake or air conditioning is controlled automatically according to certain conditions such as or position. To canc ...

Curtain Airbag (CAB) Module: Description and Operation
Description Curtain airbags are installed inside the headliner (LH and RH) and protect the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of curtain ai ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0515