Kia Sportage: Repair procedures
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Ignition Switch Assembly / Repair procedures
| Inspection |
| 1. |
Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column.
|
| 2. |
Check for continuity between the terminals. |
| 3. |
If continuity is not specified, replace the switch. |
| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the steering column upper and lower shrouds.
(Refer to the ST group - "Steering column") |
| 3. |
Remove the ignition switch (A) after disconnecting the 6P connector (B).
|
| 4. |
Remove the key warning and immobilizer connector (A).
|
| 5. |
Remove the key illumination cover. |
| 6. |
If it is necessary to remove the key lock cylinder (A), remove the key lock cylinder after pushing lock pin (B) with key ACC.
|
| Installation |
| 1. |
Install the key lock cylinder. |
| 2. |
Install the illumination cover. |
| 3. |
Install the key warning and immobilizer connector. |
| 4. |
Install the ignition switch. |
| 5. |
Install the steering column shrouds and crash pad lower panel. |
Ignition Switch Assembly
Back View Camera System
See also:
Components and Components Location
Component Location
1. Back view camera2. ECM mirror
...
Special Service Tools
Special Service Tools
Tool (Number and name)IllustrationUseAlternator pulley remover wrench(09373-27000)Removal and installation of alternator pulley
...
Fluid: Components and Components Location
Components Location
1. Injection hole(eyebolt)2. Oil level plug3. Oil drain plug
...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0575