Kia Sportage: Repair procedures
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Back View Camera System / Repair procedures
| Removal |
| 1. |
Remove the tailgate trim in the trunk after removing the screws and clips.
(Refer to the BD group - "Tailgate") |
| 2. |
Remove the tailgate garnish (A) after disconnecting the connector and removing the bolts.
|
| 3. |
Remove the back view camera (A) after loosening the screws (2EA).
|
| Installation |
| 1. |
Install the back view camera. |
| 2. |
Install the tailgate garnish and trim. |
Description
Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position.
This system is a supplemental system that shows behind the...
Description and Operation
Heating,Ventilation, Air Conditioning
See also:
Out of position warning
The out-of-position warning detects whether the front passenger is sitting in a position that could affect air bag
deployment. If the system detects an improper seating position, the front passenge ...
Trailer Stability Assist (TSA). Brake Assist System (BAS)
Trailer Stability Assist (TSA)
Trailer Stability Assist (TSA) is a vehicle stability control system designed to help stabilise the Kia Sportage and
trailer if the trailer begins to sway or oscillat ...
Instrument Cluster: Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cluster fascia panel (A).
3.
Remove the cluster assembly (A) after loosening 4 screws.
4.
Disconnect the cluster ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0563