Kia Sportage: Rheostat: Repair procedures - Lighting System - Body Electrical SystemKia Sportage: Rheostat: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Lighting System / Rheostat: Repair procedures

Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
3.
Remove the crash pad side switch assembly (A) after loosening 2 screws.

   
Put on gloves to protect your hands.
4.
Remove the side crash pad switch after disconnecting the connectors (A).

5.
Operate the switch and check for continuity between terminals with an ohmmeter.

Hazard Lamp Switch: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the center fascia panel (A). (Refer to BE group - "Audio unit")     Take care not to damage and sc...
Front Fog Lamps: Repair procedures
Inspection Front Fog Lamp Switch 1. With the fog lamp switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the mul...
See also:

Automatic climate control system
1. AUTO (automatic control) button 2. Driver's temperature control knob 3. A/C display 4. Mode selection button 5. Air conditioning button* 6. Fan speed control switch 7. Passenger's t ...

Maintenance when trailer towing. If you do decide to pull a trailer
Maintenance when trailer towing Frequent towing places additional demands on your Kia Sportage, so some maintenance may be needed more often than under normal driving conditions. Pay particular att ...

Securing a child restraint seat with child seat lower anchor system
Some child seat manufacturers make child restraint seats that are labeled as LATCH or LATCH-compatible child restraint seats. LATCH stands for "Lower Anchors and Tethers for Children". ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0692