Kia Sportage: Seat Heater Switch: Repair procedures| Inspection |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the gear knob. Remove the floor console upper cover (A) using the appropriate tool.
(Refer to BD group - "Console")
|
| 3. |
Remove the floor console tray (A).
|
| 4. |
Disconnect the driver / assist seat heater switch connector.
Driver [Heater]
Driver [Ventilation + Heater]
Assist [Heater]
|
| 5. |
Operate each seat heater switch and check that continuity exists between the terminals.
[Heater]
Driver [Ventilation + Heater]
Driver [Ventilation + Heater]
|
| 6. |
Inspect the switch pin. If needed, replace the seat heater switch (A) after loosening the screws (3EA).
|
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the power window switch from the rear door trim.
(Refer to BE group - "Power window switch")
|
| 3. |
Inspect the switch pin. If needed, replace the seat heater switch.
|
Door Locks Outside the Vehicle
Locking and Unlocking with the Smart Key
Figure 1. Button Type
Figure 2. Touch Sensor Type (If Equipped)
...
Bulb replacement precautions
Before replacing a bulb, park the Kia Sportage in a safe place, switch off the engine, apply the parking brake firmly
and disconnect the negative battery terminal. Use only a replacement bulb with ...
Interior Trim: Components and Components Location
Components
1. Front pillar trim2. Center pillar upper trim3. Center pillar lower trim4. Luggage side trim5. Cowl side trim6. Front door scuff trim7. Rear door scuff trim8. Front step trim9. Rear ...