Kia Sportage: Shift Lever: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Automatic Transaxle System / Automatic Transaxle Control System / Shift Lever: Repair procedures

Removal

1.	Remove the center console assembly. (Refer to "Interior(console)" in BD group.)

2.	Disconnect sports mode connector (A).

3.

Remove the shift lever assembly (D).

(1)	Take off the clip (A) and then remove the shift cable (B).

(2)

Remove the bolts (C-4ea).

Tightening torque:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Installation

When installing, set room side shift lever and T/M side lever to "N" position.

1.	Install in the reverse order of removal.

Shift Lever: Components and Components Location

Components 1. Shift lever knob & boots assembly2. Shift lever assembly3. Shift cable assembly4. Cable retainer5. Shift cable retainer...

Shift Cable: Components and Components Location

Components 1. Shift lever knob & boots assembly2. Shift lever assembly 3. Shift cable assembly4. Cable retainer...

See also:

Towing
Towing Service Wheel dollies If the Kia Sportage needs to be towed, Kia recommends using an authorised Kia dealer or a c ...

Compact spare tire replacement
A compact spare tire has a shorter tread life than a regular size tire. Replace it when you can see the tread wear indicator bars on the tire. The replacement compact spare tire should be the same ...

Manifold Absolute Pressure Sensor (MAPS): Description and Operation
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog si ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0568