Kia Sportage: Starter Relay: Repair procedures
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Electrical System / Starting System / Starter Relay: Repair procedures
| Inspection |
| 1. |
Remove the fuse box cover. |
| 2. |
Remove the starter relay (A).
|
| 3. |
Using an ohmmeter, check that there is continuity between each terminal.
|
| 4. |
Apply 12V to terminal 85 and ground to terminal 86.
Check for continuity between terminals 30 and 87.
|
| 5. |
If there is no continuity, replace the starter relay. |
| 6. |
Install the starter relay. |
| 7. |
Install the fuse box cover. |
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal (A).
Tightening torque :
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)
3.
Remove the ...
Starter: Repair procedures
Cruise Control System
See also:
Hazard Lamp Switch: Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center fascia panel (A).
(Refer to BE group - "Audio unit")
Take care not to damage and sc ...
Repair procedures
Adjustment
TCM Learning
When shift shock is occurred or parts related with the transaxle are replaced, TCM learning should be performed.
In the following case, TCM learning is required.
...
Repair procedures
On-vehicle Inspection
Spark Test
1.
Disconnect the ignition coil connectors (A).
2.
Remove the ignition coils (A).
3.
Using a spark plug socket, remove the spark plug.
4.
Install th ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0503