Kia Sportage: Telemetics Unit (TMU): Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / MTS System / Telemetics Unit (TMU): Repair procedures

Removal

•	Take care not to scratch the crash pad and related parts.

1.	Disconnect the negative (-) battery terminal.

2.	Remove the crash pad garnish (A) after loosening the screw.

3.	Remove the MTS unit (A) after loosening the mounting bolts.

Installation

1.	Install the MTS unit.

2.	Install the crash pad garnish.

3.	Connect the negative (-) battery terminal.

Inspection

1.	After replacing the TMU unit, access Dealer Engineering Mode in head unit. (Refer to MTS system - "TMU Dealer Engineering Mode")

2.	Check the TMU version ("App S/W") from the head unit screen. [Audio type] [AVN type]

3.	Check the H/U Type from the head unit screen. [Audio type] [AVN type]

4.	Check the Model from the head unit screen. [Audio type] [AVN type]

Telemetics Unit (TMU): Components and Components Location

Component Connector Pin Specification No.Pin NameTypeFromToDescription (Wiring Spec.)1GNDDC GroundTMUBatteryConnected to battery ground2GNDDC GroundTMUBatteryConnected to battery ground3-----4--...

Smart key System

...

See also:

Parking brake
Check that the brake warning light illuminates when the vehicle is in the START or ON position. Before driving, make sure the parking brake is fully released and the brake warning light is off ...

Fuel Tank Pressure Sensor (FTPS): Schematic Diagrams
Circuit Diagram ...

Electric Waste Gate Actuator (EWGA): Specifications
Specification [EWGA Position Sensor] PositionOutput Voltage[V]Operating Angle[°]Range of Rod [mm], referenceMechanical Close end stop Position (MCP)4.800Electrical Close end stop Position ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0547