Kia Sportage: Turbo Charger: Components and Components Location - Intake And Exhaust System - Engine Mechanical SystemKia Sportage: Turbo Charger: Components and Components Location

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Mechanical System / Intake And Exhaust System / Turbo Charger: Components and Components Location

Components

1. Turbine housing
2. Turbine inlet
3. Turbine outlet
4. Compressor housing
5. Compressor inlet
6. Compressor outlet
7. Center housing
8. EWGA (Electric Waste Gate Actuator)
9. Actuator rod

Exhaust Manifold: Repair procedures
Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal (A). Tightening torque 4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) 3. Disconnect t...
Turbo Charger: Repair procedures
On-vehicle Inspection Turbocharger Diagnostic Flow If any problem related with turbocharger, such as lack of engine power, poor acceleration, abnormal engine noise or oil leaks, may occur, c...
See also:

Body Control Module (BCM): Schematic Diagrams
Circuit Diagram ...

Driver Airbag (DAB) Module and Clock Spring: Components and Components Location
Components 1. Driver Airbag (DAB)2. Steering Wheel3. Clock Spring ...

Components and Components Location
Components Location 1. Receiver2. TPMS Sensor3. TPMS Sensor4. TPMS Sensor5. TPMS Sensor ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0516