Kia Sportage: Valve Body: Components and Components Location - Hydraulic System - Automatic Transaxle SystemKia Sportage: Valve Body: Components and Components Location

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Automatic Transaxle System / Hydraulic System / Valve Body: Components and Components Location

Component Location

1. Automatic transaxle
2. Valve body assembly


1. Pressure Control Valve(PCV) adjust screw
2. Solenoid valve bracket
3. Oil temperature sensor
4. Line Pressure Control Solenoid Valve
5. SS-A Solenoid Valve(ON/OFF)
6. SS-B Solenoid Valve(ON/OFF)
7. Overdrive Clutch Control Solenoid Valve(OD/C)
8. Underdrive Brake Control Solenoid Valve(UD/B)
9. 26 Brake Control Solenoid Valve(26/B)
10. 35R Clutch Control Solenoid Valve(35R/C)
11. Torque Converter Control Solenoid Valve (T/CON)
12. LR/B pressure fiow hole
13. UD/B pressure fiow hole
14. Accumulator

Valve Body Flow

1. To cooler
2. From cooler
3. Lubrication(rear)
4. OD Clutch pressure
5. Reducing pressure (red2)
6. Reducing pressure (red1)
7. Damper release pressure
8. Damper apply pressure
9. Lubrication(front)
10. 35R Clutch pressure
11. 26 Brake pressure
12. From oil pump
13. To oil pump
14. Underdrive(UD) Brake pressure
15. Low & reverse pressure

Fluid: Repair procedures
Service Adjustment Procedure Oil level Check     When checking the oil level, be careful not to enter dust, foreign matters, etc. from fill hole. 1. Remove the ey...
Valve Body: Description and Operation
Description The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of press...
See also:

Filler-Neck Assembly: Repair procedures
Removal 1. Remove the rear-LH wheel, tire, and the inner wheel house. 2. Disconnect the fuel filler hose (A) and the ventilation hose (B). 3. Open the fuel filler door and unfasten the fil ...

Troubleshooting
TPMS Inspection method Inspection     Find the inspection number by referring to the table above. The following content is irrelevant of the inspection procedure. 1. ...

Front Stabilizer Bar: Repair procedures
Replacement 1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0641