Kia Sportage: 4WD system warning light - Warnings and indicators - Instrument cluster - Features of your vehicleKia Sportage: 4WD system warning light

Kia Sportage Owners Manual (3rd Generation, SL; 2011-2016) / Features of your vehicle / Instrument cluster / Warnings and indicators / 4WD system warning light

When the ignition switch is turned to the ON position, the 4WD indicator will illuminate and then go off in a few seconds.

If the 4WD system warning light illuminates, this indicates that there is a malfunction in the 4WD system. If this occurs, have your vehicle checked by an authorized Kia dealer as soon as possible.

KEY OUT indicator
When the ENGINE START/STOP button is in the ACC or ON position, if any door is open, the system checks for the smart key. If the smart key is not in the vehicle, the indicator will blink, and if a...
4WD LOCK indicator
The 4WD LOCK indicator light is illuminated when the 4WD LOCK button is pushed. The purpose of this 4WD LOCK mode is to increase the drive power when driving on wet pavement, snow-covered roads an...
See also:

35R Clutch Control Solenoid Valve(35R/C_VFS): Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). 3. Remove the air cleaner assembly. (1) Disconnect the breather hose (A) and brake booster intensifier hose. (2) ...

Fob Holder: Repair procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the floor console. (Refer to the BD group - "Console") 3. Disconnect the connector (B), then remove the fob holder assemb ...

Power Window Motor: Repair procedures
Inspection Front Power Window Motor 1. Remove (-) negative battery terminal. 2. Remove the front door trim. (Refer to the BD group - "Front door") 3. Disconnect the connector from the m ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0559