Kia Sportage: Antenna Coil: Repair procedures - Immobilizer System - Body Electrical SystemKia Sportage: Antenna Coil: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Immobilizer System / Antenna Coil: Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds (A).

   
Take care not to damage and scratch the shrouds and its related parts.
Take care not to damage the hook when removing the upper and lower shrouds.
3.
Disconnect the 6P connector (B) of the coil antenna and then remove the coil antenna (A).

Installation
1.
Install the coil antenna and connect the 6P connector.
2.
Install the steering column upper and lower shrouds.
Immobilizer Control Unit: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") 3. Remove the steering column assembly. (Refer to the...
Troubleshooting
Diagnosis Of Immobilizer Faults – Communication between the ECM and the SMARTRA. – Function of the SMARTRA and the transponder. – Data (stored in the ECM related to...
See also:

Description and Operation
Description The immobilizer system will disable the vehicle unless the proper ignition key is used, in addition to the currently available anti-theft systems such as car alarms, the immobilizer ...

SRS components and functions
The SRS consists of the following components: 1.Driver's front air bag module 2.Passenger's front air bag module 3.Side impact air bag modules 4.Curtain air bag modules 5.Retractor pre- ...

Engine compartment fuse panel (Battery terminal cover)
Figure 1. Type A Figure 2. Type B ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0565