Kia Sportage: Immobilizer Control Unit: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Immobilizer System / Immobilizer Control Unit: Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the crash pad lower panel. (Refer to the BD group - "Crash pad")

3.	Remove the steering column assembly. (Refer to the ST group - "steering column & shaft")

4.	Disconnect the connector of the SMARTRA unit and then remove the SMARTRA unit (A) after loosening a bolt. [USA] [Canada] Disconnect the connector of the SMARTRA unit(A) and then remove the bracket and immobilizer unit.

Installation

1.	Install the immobilizer control unit after connecting the unit connector.

2.	Install the steering column assembly.

3.	Install the crash pad lower panel.

Repair procedures

Replacement Problems And Replacement Parts: ProblemPart setScan tool required?All keys have been lostBlank key (4)YESAntenna coil unit does not workAntenna coil unitNOECM does not workPCM(ECM)YE...

Antenna Coil: Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds (A). Take care not to damage and scratch the shroud...

Kia Sportage: Immobilizer Control Unit: Repair procedures

See also:

Categories