Kia Optima Manuals

Kia Sportage: Blower Motor: Repair procedures - Blower - Heating,Ventilation, Air ConditioningKia Sportage: Blower Motor: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Heating,Ventilation, Air Conditioning / Blower / Blower Motor: Repair procedures

Inspection
1.
Connect the battery voltage and check the blower motor rotation.

2.
If the blower motor is not operating when voltage is applied, substitute with a known-good blower motor and check for proper operation.
3.
If the problem is corrected, replace the blower motor.
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the connector (A) of the blower motor.
3.
Remove the blower motor (B) after loosening the mounting screws.

4.
Installation is the reverse order of removal.
Blower Unit: Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad and heater blower unit. (Refer to HA group - "Heater Unit") 3. Remove the heater blower unit (A) fro...
Power Mosfet: Repair procedures
Inspection 1. Ignition "ON" 2. Manually operate the control switch and measure the voltage of blower motor. 3. Select the control switch to raise voltage until high speed. Specification ...
See also:

Troubleshooting
Trouble Symptom Charts Trouble Symptom 1 Trouble Symptom 2 Trouble symptomProbable causeRemedyThe set vehicle speed varies greatly upward or downward"Surging" (repeated alternating accelerati ...

Input Speed Sensor: Specifications
Specifications ? Type: Hall effect sensor Operation condition (°C)°F((-)40~150)) -40~302Air gap (mm)in.(0.95~1.65) 0.0374~0.0649Output voltage(V)High1.18 ~ 1.68Low0.59 ~ 0.84 ...

Engine Coolant Temperature Sensor (ECTS): Specifications
Specification TemperatureResistance (k?)°C°F-40-4048.14-20-414.13 ~ 16.830325.7920682.31 ~ 2.59401041.15601400.59801760.32 ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0667