Kia Sportage: Blower Unit: Repair procedures
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Heating,Ventilation, Air Conditioning / Blower / Blower Unit: Repair procedures
| Replacement |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the crash pad and heater blower unit.
(Refer to HA group - "Heater Unit") |
| 3. |
Remove the heater blower unit (A) from crash pad.
|
| 4. |
Remove the blower unit (A) from the heater unit (B) after loosening a mounting bolt and screws.
|
| 5. |
Installation is the reverse order of removal. |
Component Location
Components
1. Intake case (LH)2. Intake case (RH)3. Blower motor4. Intake door5. Intake actuator6. Mofet [Auto type]7. Resistor [Manual type]8. Climate control air filter cove...
Blower Unit: Components and Components Location
Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor is not operating when voltage is applied,
substitute with a known-good blower motor and ...
Blower Motor: Repair procedures
See also:
Battery: Components and Components Location
Components
1. Battery insulation pad2. Battery3. Battery tray4. ECM & bracket assembly5. Battery mounting bracket
...
Seat belt warning (for front passenger’s seat)
As a reminder to the front passenger, the front passenger's seat belt warning
light will blink for approximately 6 seconds each time you turn the ignition switch
ON regardless of belt fasten ...
Air conditioning
Press the A/C button to turn the air conditioning system on (indicator light
will illuminate).
Press the button again to turn the air conditioning system off. ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0647