Kia Sportage: Blower Resistor: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Heating,Ventilation, Air Conditioning / Blower / Blower Resistor: Repair procedures

Inspection

1.	Measure terminal-to-terminal resistance of the blower resistor.

measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor)

1. ML
2. MH

3. LO
4. HI

Replacement

1.	Disconnect the negative (-) battery terminal.

2.	Disconnect the blower resistor connector (A) and then remove the blower resistor (B) after loosening the mounting screws.

3.	Installation is the reverse order of removal.

Power Mosfet: Repair procedures

Inspection 1. Ignition "ON" 2. Manually operate the control switch and measure the voltage of blower motor. 3. Select the control switch to raise voltage until high speed. Specification ...

Climate Control Air Filter: Description and Operation

Description This has particle filter which eliminates foreign materials and odor. The particle filter includes odor filter as well as conventional dust filter to ensure comfortable interior en...

Kia Sportage: Blower Resistor: Repair procedures

See also:

Categories