Kia Sportage: Water pump: Repair procedures| Removal and Installation |
| 1. |
Loosen the drain plug, and then drain the engine coolant. Remove the radiator cap to drain with speed. |
| 2. |
Remove the drive belt (A) after turning the drive belt tensioner (B) counterclockwise.
|
| 3. |
Remove the water pump pulley (A).
|
| 4. |
Remove the water pump sub assembly (A) with the gasket.
|
| 5. |
Remove the exhaust manifold heat protectors (A).
|
| 6. |
Remove the water pump cover (A) with the gasket and the water inlet pipe (B).
|
| 7. |
Installation is reverse order of removal with a new water pump gasket. |
| 8. |
Fill the engine coolant. |
| 9. |
Start the engine and check for leaks. |
| 10. |
Recheck the coolant level. |
| Inspection |
| 1. |
Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary. |
| 2. |
Check the bearing for damage, abnormal noise and sluggish rotation, and replace the coolant pump assembly if necessary. |
| 3. |
Check for coolant leakage. If coolant leaks from hole, the seal is defective. Replace the coolant pump assembly.
|
Bulb Wattage
Items marked with an asterisk are fitted only if equipped. The lighting configuration may vary by Kia Sportage
specification.
Light bulb
Bulb t ...
Telemetics Unit (TMU): Repair procedures
Removal
•
Take care not to scratch the crash pad and related parts.
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad garnis ...
Limitations of Parking Collision-Avoidance Assist
Parking Collision-Avoidance Assist may not warn you or provide braking assistance, even when a pedestrian or object
is present, in any of the following situations:
The vehicle has a problem or ...