Kia Sportage: Button Engine Start System
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Button Engine Start System
- Components and Components Location
- Schematic Diagrams
- Description and Operation
- Start/Stop Button: Components and Components Location
- Start/Stop Button: Repair procedures
- Fob Holder: Components and Components Location
- Fob Holder: Repair procedures
Removal
1.
Lift up the vehicle.
(Refer to GI group - "Lift and support points")
2.
Remove the rear bumper.
(Refer to the BD group - "Rear bumper")
3.
Pull out the sensor by opening the s...
Ultrasonic Sensor: Repair procedures
Component Location
1. Start Stop Button (SSB)2. FOB key holder3. FOB key4. Tailgate switch5. Smart key unit6. RF receiver7. BCM (Body Control Module) 8. Interior ant...
Components and Components Location
See also:
Pressure Sensor: Description and Operation
Description
The 4WD ECU makes a Motor Pump(Actuator) turn round for
generating an oil pressure. And then it presses a multiple disk clutch
and transfers the generated torque into rear wheels. I ...
Rear Washer Motor: Repair procedures
Inspection
1.
With the washer motor connected to the reservoir tank, fill the reservoir tank with water.
Before filling the reservoir tank with water, check the
fil ...
Intake Air Temperature Sensor (IATS): Description and Operation
Description
Intake Air Temperature Sensor (IATS) is included inside
Manifold Absolute Pressure Sensor and detects the intake air
temperature.
To calculate precise air quantity, correction of t ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0694