Kia Sportage: Climate Seat: Components and Components Location
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Seat Electrical / Climate Seat: Components and Components Location
| Components |
| 1. Ventilation blower 2. Ventilation ECU 3. Ventilation seat switch | 4. Blower connector 5. Heater connector 6. Ventilation ECU connector |
Removal
1.
Remove the seat back cover and cushion cover.
(Refer to the BD group - "Front seat")
2.
Remove the driver / assist seat back heater (A) and cushion heater (B).
3.
Remove the cu...
Seat Heater: Repair procedures
Schematic Diagram
Connector Configurations...
Climate Seat: Schematic Diagrams
See also:
High Pressure Fuel Pump: Repair procedures
Removal
In case of removing the high pressure fuel pump, high
pressure fuel pipe, delivery pipe, and injector, there may be injury
caused by leakage of the high pre ...
Photo Sensor: Repair procedures
Inspection
1.
Ignition "ON"
2.
Using the scan tool.
3.
Emit intensive light toward photo sensor using a lamp, and check the output voltage change.
4.
The voltage will rise with higher ...
Interior care
Interior general precautions
Prevent chemicals such as perfume, cosmetic oil, sun cream, hand cleaner, and
air freshener from contacting the interior parts because they may cause damage or
discol ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0631