Kia Sportage: Description and Operation
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Auto Lighting Control System / Description and Operation
| Description |
This function describes the following features
| – |
Input detection by Auto Light Sensor. |
| – |
Generate Auto Light Out Status data. |
| – |
Send Auto Light Out Status. |
| – |
Tail Lamp Control by Auto light Mode. |
| – |
Head Lamp Low Control by Auto light Mode. |
| – |
AV Tail Control by Auto Light sensor level. |
| • |
Auto Light Mode State Diagram is based on Auto Light Sensor''s level. |
| • |
Power condition of Auto Light Action |
| – |
When ACC, IGN, START terminal states, Auto Light Sensor operates. |
Circuit Diagram...
Schematic Diagrams
Inspection
In the state of IGN1 ON, when multi function switch module
detects auto light switch on, tail lamp relay output and head lamp low
relay output are controlled according to auto light ...
Auto Light Sensor: Repair procedures
See also:
Navigation-based Smart Cruise Control settings. Auto Highway Speed Change
Auto Highway Speed Change
Driver Assistance
Driving Convenience
...
Removable towing hook
Front
Rear
1.Open the tailgate, and remove the towing hook from the tool case.
2.Remove the hole cover pressing the lower part of the cover on the bumper.
3.Install the towing hook by turning ...
Heating and air conditioning
1.Start the engine.
2.Set the mode to the desired position. For improving the effectiveness of heating
and cooling;
- Heating:
- Cooling:
3.Set the temperature control to the desired position. ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0636