Kia Sportage: Exhaust Manifold: Components and Components Location - Intake And Exhaust System - Engine Mechanical SystemKia Sportage: Exhaust Manifold: Components and Components Location

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Mechanical System / Intake And Exhaust System / Exhaust Manifold: Components and Components Location

Components

1. Hear protector
2. EWGA(Electric Waste Gate Actuator)
3. C-ring
4. Turbo manifold module
5. Turbocharger stay
6. Trubo adapter gasket
7. Turbo adapter
8. Turbo adapter heat protector
9. Oil drain pipe assembly
10. Turbocharge oil drain gasket
11. Oil feed pipe & hose assembly
12. Oil drain gasket
13. Exhaust manifold gasket
14. Turbocharger water feed hose
15. Turbocharger water drain hose

Intake Manifold: Repair procedures
Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal (A). Tightening torque 4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) 3. Remove the ai...
Exhaust Manifold: Repair procedures
Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal (A). Tightening torque 4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) 3. Disconnect t...
See also:

Wheel alignment and tire balance
The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. In most cases, you will not need to have your wheels al ...

Ignition key interlock system
The ignition key cannot be removed unless the shift lever is in the P (Park) position. Even if the ignition switch is in the LOCK position, the key also cannot be removed. If your vehicle is equi ...

Dimensions
*1 with roof rack *2 with 215/70R16 tire *3 with 225/60R17 tire *4 with 235/55R18 tire ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0586