Kia Sportage: Fender: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body (Interior and Exterior) / Exterior / Fender: Repair procedures

Replacement

•	When removing and installing the fender, an assistant is necessary.

•	Be careful not to damage the fender and body.

•	When removing the clips, use a clip remover.

1.	Remove the front bumper cover. (Refer to the BD group – “Front bumper”)

2.	Loosen the mud guard (A) mounting screws and clips.

3.	After loosening the mounting screws and clips, then remove the side sill moulding (A).

4.	Detach the clips and then remove the insulator pad (A).

5.	After loosening the mounting screw and bolt, then remove the front bumper side mounting bracket (A).

6.	After loosening the mounting bolts, then remove the fender (A).

7.	Installation is the reverse of removal.

...

Hood: Repair procedures

Replacement Hood Assembly Replacement • When removing and installing the hood, an assistant is necessary. • Take care not to damaged the hood an...

See also:

Hitches
It's important to have the correct hitch equipment. Crosswinds, large trucks going by, and rough roads are a few reasons why you’ll need the right hitch. Here are some rules to follow: W ...

Side Airbag (SAB) Module: Components and Components Location
Components ...

Manual climate control system
1.Turn the ignition switch to the ON position. 2.Turn the mode selection knob to the defrost position (). 3.Press the air intake control button at least 5 times within 3 seconds. The indicator li ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0495