Kia Optima Manuals

Kia Sportage: Front Lower Arm: Repair procedures - Front Suspension System - Suspension SystemKia Sportage: Front Lower Arm: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Suspension System / Front Suspension System / Front Lower Arm: Repair procedures

Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 07.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

   
Be careful not to damage to the hub bolts when removing the front wheel & tire (A).
2.
Loosen the bolt & nut and then remove the lower arm (A).
Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

3.
Remove the front lower arm from the front knuckle using the SST (0K545-A9100).
(1)
After removing bolts from the front knuckle, install and tighten the sub body bolt (A) .

(2)
Input the sub body (A) between the front knuckle and the sub body bolt.
(3)
Tighten bolt (B) of the sub body bolt to broaden the gap of the front knuckle.

(4)
Install the safe wire (A).

   
Install a safe wire on the front strut to prevent dropping the SST and hurting technicians.
(5)
Install the main body, between the front strut and the lower arm.

(6)
To avoid the main body coming off, install a fixing clamp (A) beside the main body.

(7)
After installing a fixing clamp, rotate the handle (B) clock wise till the clamp is fixed on a lower arm.

(8)
Tighten a main body bolt (A) of the slowly and remove the lower arm from the front knuckle.

4.
Remove the front lower arm (A) and then loosen the bolt (B, C).
Tightening torque :
Bolt (B)
117.7 ~ 137.3N.m (12.0 ~ 14.0kgf.m, 86.8 ~ 101.3lb-ft)
Bolt (C)
137.3 ~ 156.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

5.
Installation is the reverse of removal.
Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the lower arm for bending or breakage.
3.
Check the lower arm for deformation.
4.
Check the all bolts and nuts.
Front Strut Assembly: Repair procedures
Replacement 1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub ...
Front Stabilizer Bar: Components and Components Location
Components 1. Stabilizer bar2. Stabilizer link3. Sub frame...
See also:

Rear Door: Repair procedures
Replacement Door Trim Replacement     • Take care not to scratch the door trim and other parts. • Put on gloves to protect your hands. 1. Using ...

Front Impact Sensor (FIS): Repair procedures
Removal     • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front i ...

Injured person
A seat belt should be used when an injured person is being transported. When this is necessary, you should consult a physician for recommendations. ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0581