Kia Optima Manuals

Kia Sportage: Front Wheel Speed Sensor: Repair procedures - ESC(Electronic Stability Control) System - Brake SystemKia Sportage: Front Wheel Speed Sensor: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Brake System / ESC(Electronic Stability Control) System / Front Wheel Speed Sensor: Repair procedures

Removal
1.
Remove the front wheel speed sensor mounting bolt (A).
Tightening torque:
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

2.
Remove the front wheel guard .
3.
Disconnect the front wheel speed sensor connector, then remove the front wheel speed sensor.
4.
Installation is the reverse of removal.
Inspection
1.
Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
   
In order to protect the wheel speed sensor, when measuring output voltage, a 100 ? resistor must be used as shown.

2.
Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown below.

V_low : 0.59V ~ 0.84V
V_high : 1.18V ~ 1.68V
Frequency range : 1 ~ 2,500Hz
Front Wheel Speed Sensor: Components and Components Location
Components 1. Front wheel speed sensor connector2. Front wheel speed sensor...
Rear Wheel Speed Sensor: Components and Components Location
Components 1. Rear wheel speed sensor connector2. Rear wheel speed sensor...
See also:

Parking brake
Checking the parking brake Type A Check whether the stroke is within specification when the parking brake pedal is depressed with 20 kg (44 lb, 196 N) of force. Also, the parking brake alone sho ...

Brake Line: Components and Components Location
Components ...

Seat height (for driver’s seat)
To change the height of the seat, push the lever upwards or downwards. To lower the seat cushion, push the lever down several times. To raise the seat cushion, pull the lever up several times. ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0627