Kia Sportage: Radiator: Components and Components Location
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Mechanical System / Cooling System / Radiator: Components and Components Location
| Components |
| 1. Cooling fan assembly 2. Radiator assembly 3. Mounting insulator 4. Radiator mounting bracket 5. Radiator upper hose | 6. Radiator lower hose 7. Reservoir tank 8. Over flow hose 9. ATF cooler hoses |
Refilling And Bleeding
Never remove the radiator cap when the engine is hot. Serious
scalding could be caused by hot fluid under high pressure escaping from
the rad...
Coolant: Repair procedures
Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester.
2.
Apply a pressure of 93.16 ~ 122.58kPa (0.95 ~ 1.25kg...
Radiator: Repair procedures
See also:
Interior Trim: Repair procedures
Replacement
Door Scuff Trim Replacement
•
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trip pieces ...
Components and Components Location
Component Location
1. Windshield deicer relay2. Windshield deicer switch3. Windshield deicer4. Deicer connector
...
Rear
9. Door
10. Fuel filler lid
11. Rear combination lamp
12. Tailgate (trunk)
13. Rear wiper blade
14. Center high mounted stop light
15. Rear window defroster
16. Antenna ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0553