Kia Sportage: Rail Pressure Sensor (RPS): Description and Operation
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Control / Fuel System / Engine Control System / Rail Pressure Sensor (RPS): Description and Operation
| Description |
Rail Pressure Sensor (RPS) is installed on the delivery pipe
and measures the instantaneous fuel pressure in the delivery pipe. The
sensing element (Semiconductor element) built in the sensor converts the
pressure to voltage signal. By using this signal, the ECM can control
correct injection amount and timing and adjusts the fuel pressure with
the fuel pressure regulator valve if the target pressure and the actual
pressure calculated by the RPS output signal are different.
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 4 and 5 [B1/S1].
4.
Measure resistance between the HO2S t...
Heated Oxygen Sensor (HO2S): Repair procedures
Specification...
Rail Pressure Sensor (RPS): Specifications
See also:
Schematic Diagrams
Schematic Diagram
...
Anchor Pretensioner: Components and Components Location
Components
...
Speed sensing door lock system (Manual transaxle, if equipped)
All doors will automatically lock after the vehicle speed exceeds about
15 km (9 mph).
All doors will automatically unlock when the engine is shut off and the
ignition key is removed.
An ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0485