Kia Sportage: Rear Hub - Carrier: Components and Components Location
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Driveshaft and axle / Rear Axle Assembly / Rear Hub - Carrier: Components and Components Location
| Components |
| 1. Hub cover 2. Carrier assembly 3. Hub & bearing assembly 4. Hub mounting bolt 5. Bushing 6. Bushing | 7. Carrier assembly 8. Bearing 9. Snap ring 10. Hub assembly 11. Hub bolt 12. Bushing |
Rear Axle Assembly
Replacement
1.
Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and tire (A) from rear hub.
Tightening torque :
88.3 ~ 1...
Rear Hub - Carrier: Repair procedures
See also:
To keep locks from freezing
To keep the locks from freezing, squirt an approved de-icer fluid or glycerine
into the key opening. If a lock is covered with ice, squirt it with an approved
de-icing fluid to remove the ice. If ...
To unfasten the rear center belt
1.Press the release button on the buckle (D) and remove the tongue plate (B)
from the buckle (D).
2.To retract the rear center seatbelt, insert the tongue plate or similar small
rigid device ...
Canister Close Valve (CCV): Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV terminal 1 and 2.
4.
Check that the resistance is within the specific ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0677