Kia Optima Manuals

Kia Sportage: Rear Lower Arm: Repair procedures - Rear Suspension System - Suspension SystemKia Sportage: Rear Lower Arm: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Suspension System / Rear Suspension System / Rear Lower Arm: Repair procedures

Replacement
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

   
Be careful not to damage to the hub bolts when removing the front wheel & tire (A).
2.
Loosen the nut and then remove the rear stabilizer link (B) with the rear lower arm (A).
Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

3.
Loosen the bolt & nut and then remove the rear shock absorber (A) with the lower arm.
Tightening torque :
137.3 ~ 156.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

4.
Loosen the bolt & nut and then remove the rear lower arm (A) with the rear axle.
Tightening torque :
137.3 ~ 156.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

5.
Loosen the bolt & nut and then remove the rear lower arm (B) with the sub frame (A).
Tightening torque :
137.3 ~ 156.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

6.
Installation is the reverse of removal.
Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the rear lower arm for deformation.
3.
Check the coil spring and spring pad for deterioration and deformation.
4.
Check for all bolts and nut.
Rear Upper Arm: Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bol...
Rear Stabilizer Bar: Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bol...
See also:

Pressure Sensor: Repair procedures
Inspection     If you have trouble code related to the pressure sensor (P1825, P1826, P1827, P1828), check pressure sensor according to the inspection process. Pre ...

Fluid: Repair procedures
Service Adjustment Procedure Oil level Check     When checking the oil level, be careful not to enter dust, foreign matters, etc. from fill hole. 1. Remove the ey ...

Temperature Control Actuator: Description and Operation
Description 1. Heater unit includes mode control actuator and temperature control actuator. 2. Temperature control actuator is located at the heater unit. It regulates the temperature by the ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0622